BRILLIANCE ROSWELL SOLAR PATH LIGHT-BLACK (BRI/9699)
The Roswell Solar Path Light is a solar energy-powered path light. The fixture is equipped with motion sensor settings. Automatic operation and wireless design make for easy installation and use.
TECHNICAL REQUIREMENTS: Choose areas with full sun. When possible, direct the solar panel to face the south. Do not install this product in a heavily-shaded area. Be sure there is no ambient light from any other light source directed at the solar panel during the evening hour
Full Charge Time-8 Hours
Dimensions- 17.7” H x 6.25” W
|ROSWELL SOLAR PATH LIGHT|
|Use||Areas with Full Sun that Need a Solar Powered Landscape Light
Areas with Full Sun that Need Motion Detection
|Finish||Stainless Steel Construction with Opaque Diffuser|
|Includes||Mono-Crystalline Laminated Glass Solar Panel
Battery – 18650, 2600mAh, 3.7V
Two Mounting Options: Flush Mount or with Included Stake Three Modes of Motion Detection:
Constant Dim Light: 30 lumens
Standby: 200 Lumens for 25 seconds
Motion: 300 Lumens for 25 seconds
||1.8W, 5V, 3000K, CRI 83, IP65, 8-18VAC, 2 year warranty
|Operating Instructions||To turn on or off, press and hold the power button for three seconds.
To change modes between three available settings, press the button for one second. Motion sensor is active at 20 to 26 feet distance at 90-degree angle.
INSTALLING THE GROUND STAKE
Dig a hole in the ground approximately 4” wide by 7” deep. When working with soft soil, use a rubber mallet to drive the stake into the ground.
Place the fixture in the center of the hole.
Use a level to ensure the top of the stake is 2” above the ground and that it is level vertically.
INSTALLING ON DECK APPLICATIONS
Use three #10 x 2” round head stainless steel deck screws to mount the fixture base to wood or composite deck material.
Position the motion sensor in the direction which traffic regularly approaches.